VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
82
TCP SERVER
Steps:
1).
Opening the
Setup Tab>Event Configuration
drop-down menu and clicking the
TCP Server
link
will open the
TCP Server
settings page.
Figure 7-43
: Setup Tab – Event Configuration Menu - TCP Server Settings
2).
From the TCP Server setting pages, a user may enter a
Port
value for the TCP Event Server.
Click the
Message Customization
button to deploy the event message settings for TCP Event
servers.
TCP Message Settings
Description
Message Header Tab
Enable and customize a custom message header.
VCA Tab
Select a default message or configure a custom message for
VCA Config,
VCA Alarm and VCA Counter
events.
MD Tab
Select a default message or custom message for motion detection events.
Network Tab
Select a default message or configure a custom message for
Network
events.
DI/DO Tab
Select a default message or configure a custom message for
DI/DO
events.
3).
Click
Apply
to save changes to the TCP Server settings.
