VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
87
UPNP SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
UPnP
link
will open the network
UPnP
settings page.
Figure 7-49
: Setup Tab –Network Configuration Menu – UPnP Settings
2).
From the
UPnP settings
page a user may enable UPnP. UPnP (Universal Plug and Play) is a set
of networking protocols that permits networked devices mobile devices to seamlessly discover
each other's presence on the network and establish functional network services for data
sharing, communications, and entertainment. UPnP is intended primarily for residential
networks without enterprise-class devices.
3).
Check-off the
Enable
box to enable UPnP. A user may also enter a device name. The camera
model number will be used as the default name.
4).
Click
Apply
to save changes to UPnP settings.
RTSP/RTP SETTINGS
Steps:
1).
Opening the
Setup Tab>Network Configuration
drop-down menu and clicking the
RTSP
link
will open the network
RTSP
settings page.
RTSP CONFIGURATION
Figure 7-50
: Setup Tab –Network Configuration Menu – RTSP/RTP Settings – RTSP Configuration
Steps:
1).
Under the
RTSP Configuration
section of the
RTSP
settings page, a user may configure an RTSP
port (default is 554). The user may also enable and choose the
RTSP Authentication Type
(digest or basic).
