VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
61
WHITE BALANCE SETTINGS
Steps:
1).
Under the
White Balance
section, a user may choose the cameras
White Balance Mode
setting from the drop-down.
Red
and
Blue
color temperature settings can also be adjusted
using the slider bars.
Figure 7-17
: Setup Tab – Video Menu – Camera Settings – White Balance Settings
IMAGE SIGNAL PROCESSING SETTINGS
Steps:
1).
Under the
Image Signal Processing
section, a user may configure the cameras
2D DNR (2
Dimension Dynamic Noise Reduction)
setting. Increasing this setting can reduce noise
surrounding moving objects within the field-of-vision. Adversely, this can increase blurring and
smudging around static objects.
2).
If the camera is heated,
Defog
mode can also be enabled in this section. After enabling defog,
the
Defog Level
can be selected in the drop-down menu.
Figure 7-18
: Setup Tab – Video Menu – Camera Settings – Image Signal Processing Settings
3).
The default setting is
3
.
VIDEO STABILIZATION SETTINGS
Steps:
1).
Under the
Video Stabilization Settings
section, a user may enable Video Stabilization for any
of the camera’s stream profiles
(First/Main, Second/Sub, and Snapshot).
Check-off the box
adjacent to each stream you wish to apply
Video Stabilization
too. The
Border Fill-In
setting
can be chosen from the drop-down menu.
NOTE:
Video stabilization settings may be automatically disabled depending on the presence of other camera
settings. Conflicting settings will be listed (orange text, below).
Figure 7-19
: Setup Tab – Video Menu – Camera Settings – Video Stabilization Settings
