VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
34
3XLOGIC VIEW LITE II MOBILE (ANDROID AND IOS) – ADDING A V-SERIES ALL-IN-ONE CAMERA
Steps:
1).
To interface a VISIX All-in-One camera with 3xLOGIC’s View Lite II mobile app, launch the View
Lite II app on your mobile device (Android OS is pictured in the below screenshot, however,
the process is identical in the iOS version).
2).
Tap the
icon to deploy the
Settings
menu.
3).
Tap the
Servers
menu option.
4).
Tap
Add VIGIL Server
.
This will launch the
Add VIGIL Server
form. VISIX All-in-One devices are
considered edge recording devices, and thus are recognized as their own VIGIL Server within
the VIGIL suite, including View Lite.
Figure 4-26:
Adding an All-in-One Camera to View Lite II
5).
Enable
VIGIL Connect
.
Alternatively, if you wish to use traditional network connection criteria,
leave
VIGIL Connect
disabled and enter in an
IP/DNS Name
and
Port
info (if using standard
network connection criteria, also ignore step 6 of these instructions) for the device.
6).
Enter in the VIGIL Connect alias for the desired VISIX V-Series All-in-One camera (VIGILTest1
used in the above example).
7).
Fill in the remaining required fields and tap
Save
to save the All-in-One camera to View Lite II.
A user may now add the camera stream to the View Lite viewer using the same process as
adding VIGIL Server or 3xCLOUD networked cameras.
