VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
57
The following settings can be configured for camera snapshots:
Snapshot Setting
Description
Resolution
Select the snapshot image resolution from the options in the drop-down
menu.
Max FPS
Set the maximum
Frames per Second
value for snapshot images using the
slider. The smaller FPS range of 1-5 helps to prevent incorrect still shots
from lag or delay. 1 is the default setting and is recommended for nearly
all use-cases.
JPEG Quality
Set the JPEG quality value for snapshot images using the slider.
FOCUS ASSIST
Steps:
1).
Opening the
Setup Tab>Basic Configuration
drop-down menu and clicking the
Stream
link will
open the
Stream
settings page.
Figure 7-10
: Setup Tab – Basic Configuration Menu – Focus Assist Settings
2).
The
Focus Assist
tool is an auto-focus function intended to aid the user in achieving optimal
lens focus to obtain the clearest image possible. Click
Start
to begin the focus assist process.
When the image attains the desired focus level, click
Stop
.
3).
Click
View
to close or open the video preview. Click
Pop-Up
to open the video preview in a
separate browser window.
7.2
Video Menu
CAMERA
Steps:
1).
Opening the
Setup Tab>Video
drop-down menu and clicking the
Camera
link will open the
Camera
settings page. A video preview is available at the bottom of the settings form. When
configuring the settings described below, be sure to scroll-down and check the video preview
as necessary.
2).
Click the
Apply
button at the bottom of the settings form (above the video preview) to apply
settings changes. Click the
Preview
button to toggle the video preview on/off. Click the
Pop-
Up
button to open the preview in a separate browser window.
