background image

   

 

PIR Sensor 

Detects movement within the unit’s detection range, 
allowing load control in response to changes in occupancy.

 

Front view 

 

PIR lens 

which covers... 

 

PIR sensor 

Overview 

The EBMPIR-MB-B miniature PIR (passive infrared) 
presence detector provides automatic control of lighting 
loads. It is specifically designed for mounting onto a batten 
style luminaire. 

The detector will switch incandescent, fluorescent, compact 
fluorescent and LED lighting. 

The unit detects movement using a PIR sensor and turns 
the load on. When an area is no longer occupied the load 
will switch off after a 10 minute time out period. 

Features 

Product Guide 

Cables to luminaire control gear 

Batten mount PIR detector 

EBMPIR-MB-B 

Summary of Contents for EBMPIR-MB-B

Page 1: ...automatic control of lighting loads It is specifically designed for mounting onto a batten style luminaire The detector will switch incandescent fluorescent compact fluorescent and LED lighting The unit detects movement using a PIR sensor and turns the load on When an area is no longer occupied the load will switch off after a 10 minute time out period Features Product Guide Cables to luminaire co...

Page 2: ... still for more than 10 seconds and wait for the load to switch off Check that the load switches on when movement is detected When the 5 minutes have elapsed the time out will be 10 minutes Power up test procedure What if the load does not turn ON Check that the live supply to the circuit is good Check that the load is functioning by bypassing the sensor e g link L and L Out What if the load does ...

Page 3: ...y Mounting hole with key Note Key to be at top of sensor Note Use the 5º spacers where the luminaire housing has a draft angle Important Ensure that the silicone washer and or the IP spacer are used to maintain IP rating Do not grip unit at the lens end Hold the square body near the threaded end when installing and tightening the nut Care must be taken to prevent damage to the lens and surrounding...

Page 4: ...a contactor Power consumption On 799mW Off 807mW Cable specification 1m 1 1 13 solid core cable 105ºC Temperature 10ºC to 50ºC Humidity 5 to 95 non condensing Material Flame retardant ABS PC Type Class 2 IP rating IP65 Compliance EMC 2004 108 EC LVD 2006 95 EC Technical data C P Electronics Ltd Brent Crescent London NW10 7XR United Kingdom Tel 44 0 333 900 0671 Fax 44 0 333 900 0674 www cpelectron...

Reviews: