VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
85
Network Setting
Description
DNS Configuration
Enter in
Primary and Secondary DNS Server
connection information.
Host Configuration
Configure the device host name.
Link – Local Address
Checking-off
Enable Auto-Configuration Link-Local Address
will generate an
alternate internal IP address which can also be used to connect to the camera,
access the UI via browser, etc…. when on the same network as the camera.
NETWORK CONFIGURATION MENU - TCP/IP SETTINGS - IPV6 SETTINGS CONFIGURATION
Steps:
1).
When the enable IPv6 box is checked, IPv6 settings fields will deploy (pictured below).
Figure 7-46
: Setup Tab –Network Configuration Menu – TCP/IP Settings – IPv6 Settings
IPv6 Setting
Description
Enable Accept Router
Advertisements
Enable Accept Router Advertisements
will allow the camera to accept
router advertisements, signaling device availability and connectivity to the
host router.
Enable DHCP
Enable DHCP
for automatic IP address assignment. Select a
DHCP Type
from
the drop-down menu.
IP Address
The device IP address. If DHCP is not enabled, the user may assign an
address.
Prefix Length
Assign an address prefix length.
Default Router
Enter the default router address.
