VIGIL Software v8.8 User Manual |
VISIX V-Series All-in-One Cameras
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
67
2).
Select the BNC output mode. Choose between
NTSC (60Hz)
or
PAL (50Hz, auto color
correction)
.
The optimal setting is dependent on the monitor receiving the video output from
the camera.
7.3
Event Configuration Menu
EVENT RULES
Steps:
1).
Opening the
Setup Tab>Event Configuration
drop-down menu and clicking the
Event Rules
link will open the
Event Rules
settings page.
Figure 7-26
: Setup Tab – Event Configuration – Event Rules Settings
2).
From the
Event Rules
settings page, a user may enable and subsequently
Add
a new event
rule. A user may also
Copy, Modify or Delete
and existing event rule.
3).
To enable, check-off the
Enable Event Rules
box.
4).
Select a rule from the list to display its
Event Source
and
Event Action
specifications under the
Information
section.
By default, VISIX V-Series All-in-One Camera’s will have events enabled and with a single motion record
rule configured, designed to trigger footage recording when motion is detected. This allows for
recording directly out-of-the-box with no user interaction required.
5).
To copy or delete
an existing rule, select the desired rule from the list and click the
Copy
…
or
Remove
button. You may be prompted to confirm the action. Click
OK
to confirm.
6).
After adding, removing or modifying rules as desired, click the
Apply
button to save changes.
