3Com 3C13612 Command Reference Manual Download

Page: 686 / 859

3Com Command Reference Guide — V1.00

Parameter

packet-filter

: The fire wall of packet-filtering.

act-number

The sequence number of ACL rule.

inbound

Use ACL rule to filter the packets received on the interface.

outbound

Use ACL rule to filter the packets forwarded from the interface.

Description

Using the

firewall packet-filter

command, you can apply related ACL on a specified

interface. Using the

undo firewall packet-filter

command, you can disable to apply

related ACL on a specified interface.

By default, no ACL rule is applied on the interface.

If you want to filter the packets received from an interface, you need to use the

keyword

inbound

; If you want to filter the packets forwarded from an interface, you

need to use the keyword

outbound

. If no direction is defined, the system will take

outbound

as the keyword.

At most 20 rules of different types can be applied on the one direction of an interface.

The greater the rule sequence number is, the higher the priority is. When configuring

the rules, it is recommended to put the rules of the same network configuration into

the ACL of the same sequence number. You can use

display acl

command to view

the arrangement and sequence of the ACL.

For related commands, see

acl

Example

# Apply the rule 201 on the inbound direction of Serial0 interface.

[3Com-Serial0]firewall packet-filter 201

inbound

3.1.10 reset acl counters

Syntax

reset acl counters

[

acl-number

]

View

All views

Summary of Contents for 3C13612




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands

3Com 3C13612, Command Reference Manual

Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands