3Com 3C13612 Command Reference Manual Download

Page: 71 / 859

System Management

Parameter

string

Describe the system location, which comprises printable characters of 1 to 50

bytes (ASCII code is in the range of 32 to 127 bytes). The default for

string

is “Beijing

China”.

Description

Using the

snmp-agent sys-info location

command, you can configure the system

information about the location of the device. Using the

undo snmp-agent sys-info

location

command, you can restore the default system location information.

You should correctly configure the system location, so that it can be used to locate the

failed equipment in case that faults occur on the network.

One and more spaces are allowed in the system location string. If multiple,

continuous spaces are input, the system will regard it as one space.

”?” is not allowed in the system location string.

For related commands, see

snmp-agent, snmp-agent sys-info contact, display

snmp-agent sys-info location

Example

# Set “Marlborough” as system location information.

[3Com]

snmp-agent sys-info location Marlborough

# Restore the default system location information.

[3Com]

undo snmp-agent sys-info location

3.1.18 snmp-agent sys-info version

Syntax

snmp-agent sys-info version

{

v2c

all

}

undo snmp-agent sys-info version

{

v2c

all

}

View

System view

Parameter

Enable SNMPv1 operations.

v2c

Enable SNMPv2c operations.

Summary of Contents for 3C13612




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands

3Com 3C13612, Command Reference Manual

Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands