3Com 3C13612 Command Reference Manual Download

Page: 702 / 859

3Com Command Reference Guide — V1.00

Example

# Display the current version of the crypto card.

[3Com]

display encrypt-card version 0

Encrypt-Card 0 version information:

Encrypt-Card hard version: 1.0

Encrypt-Card soft version: 1.0

Encrypt-Card CPLD version: 1.0

4.1.11 display ipsec policy

Syntax

display ipsec policy

{

all | brief | name

policy-name

[

sequence-number

] }

View

All views

Parameter

all

: Displaying information about all the IPSec policies

brief

: Displaying brief information about all the IPSec policies.

policy-name

: Name of an IPSec policy.

sequence-number

: Sequence number of an IPSec policy. If it is not specified, then

the information about all the IPSec policies whose name is

policy-name

is displayed.

Description

Using the

display ipsec policy

command, you can view information about the IPSec

policy.

This command is applicable to the IPSec module of the operating system.

brief

command is for displaying brief information about all the IPSec policies, whose

display format is the brief format (see the following example). The

brief

command

can be used to quickly display all the IPSec policies. Brief information includes: name

and sequence number of policy, negotiation mode, access control list number,

proposal set, local address, and remote address.

The other two command words (

all

and

name

) are used to display the detailed

information about the IPSec policy, whose display format is the detailed format (see

the following example).

Summary of Contents for 3C13612




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands

3Com 3C13612, Command Reference Manual

Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands