Dial-Up
View
Physical or dialer interface view
Parameter
packets
: Number of packets that can be buffered on this interface, ranges from 0 to
100. By default, the value of
max-threshold
is 30.
Description
Using the
dialer queue-length
command, you can configure the number of packets
which comply with the "permit" statement that can be buffered before a link is set up.
Using the
undo dialer queue-length
command, you can restore the default number
of the packets that can be buffered.
In the link establishing process, the packets which comply with the "permit" statement
are held in the buffer queue to wait for transmission as soon as the link is set up. The
setting of
packets
decides the queue length. If the length is set to 0, the outgoing
packets before the link on the interface is set up will be discarded.
Example
# Set the number of packets that can be buffered on Serial 1 to 10.
[3Com-Serial1]
dialer queue-length 10
1.1.13 dialer route
Syntax
dialer route
protocol
next-hop-address
[
user
hostname
] [
broadcast
]
[
dial-number
] [
autodial
] [
logical-channel logic-channel-number
]
undo dialer route
protocol next-hop-address
[
user
hostname
] [
broadcast
]
[
dial-number
] [
autodial
] [
logical-channel logic-channel-number
]
View
Physical or dialer interface view
Parameter
protocol:
Network protocol keyword, being
ip
or
ipx
.
next-hop-address:
Remote network address.
13
Summary of Contents for 3C13612
Page 1: ...3Com Router Command Reference Guide V1 00 http www 3com com Part No Published August 2003 ...
Page 199: ...3Com Router Command Reference Guide V1 00 8 1 36 reset stp statistics 167 6 ...
Page 456: ...3Com Router Command Reference Guide V1 00 Quidway reset ipx statistics 96 ...
Page 493: ...Routing Protocol 6 1 10 ip policy route policy 137 5 ...
