3Com Router Command Reference Guide — V1.00
This command can only be applied to a physical interface, which can be assigned to
multiple dialer bundles.
Note:
To enable the B channel of ISDN interface (BRI or PRI) to config its link layer protocol dynamically in
terms of the Dialer interface it belongs to, link layer protocol that the interface uses should be specified
as PPP.
For related commands, see
dialer bundle
.
Example
# Make Bri1 a member of dialer bundle1 and dialer bundle2, and assigns it a priority
of 50.
[3Com]
interface bri 1
[3Com-Bri1]
dialer bundle-member 1 priority 50
[3Com-Bri1]
dialer bundle-member 2 priority 50
1.1.5 dialer callback-center
Syntax
dialer callback-center
[
user
] [
dial-number
]
undo dialer callback-center
View
Physical or dialer interface view
Parameter
user
:
Call back according to the parameter
user
hostname
configured in the
dialer
route
command.
dial-number
: Call back according to the parameter
telephone-number
configured in
the
local-user callback-number
command.
6
Summary of Contents for 3C13612
Page 1: ...3Com Router Command Reference Guide V1 00 http www 3com com Part No Published August 2003 ...
Page 199: ...3Com Router Command Reference Guide V1 00 8 1 36 reset stp statistics 167 6 ...
Page 456: ...3Com Router Command Reference Guide V1 00 Quidway reset ipx statistics 96 ...
Page 493: ...Routing Protocol 6 1 10 ip policy route policy 137 5 ...
