3Com 3C13612, Command Reference Manual

Page: 163 / 859

3Com Router Command Reference Guide — V1.00
Example
# Place the E1-F interface in local loopback.
[3Com-Serial0] fe1 loopback local
3.4.6 fe1 timeslot-list
Syntax
fe1 timeslot-list { all | range }
undo fe1 timeslot-list
View
E1-F interface view
Parameter
all : Binds all the time slots on an interface, the interface rate will become 31 X
64kbps (that is, 1984kbps) after binding.
range : Time slots participating in the binding operation, it is in the range of 1 to 31.
When specifying time slots for binding, you can configure a single time slot by using
the form of “number”, the time slots in a range by using the form of
“number1-number2”, or multiple time slots by using the form of “number1,
number2-number3”.
Description
Using the fe1 timeslot-list command, you can configure the time slots that will
participate in the binding operation on an E1-F interface. Using the undo fe1
timeslot-list command, you can restore the default setting of time slot binding.
By default, all the time slots on an E1-F interface are bound. That is, the E1-F
interface rate defaults to 1984kbps.
Time slot binding operation on an E1-F interface will result in changing of interface
rate. For example, after the user binds the time slots 1 through 10, the interface rate
will become 10 X 64kbps.
If an E1-F interface is working in unframed mode, the fe1 timeslot-list command
cannot be configured.
For related commands, see fe1 unframed .
52