Link Layer Protocol
5.1.26 x25 ignore called-address
Syntax
x25 ignore called-address
undo x25 ignore called-address
View
Interface view
Parameter
None
Description
Using the
x25 ignore called-address
command, you can omit the X.121 address of
the called DTE in outgoing calls while X.25 originates the call. Using the
undo x25
ignore called-address
command, you can disable the function.
By default, this function is disabled.
According to X.25, the call request packet must carry the address code group. But in
some occasions, the X.25 call request does not have to carry the called/calling DTE
address in a specific network environment or as is required by the application. This
command enables you to specify whether the call request sent by X.25 in the 3Com
series routers carries the called DTE address.
For related commands, see
x25 response called-address
,
x25 response
calling-address, x25 ignore calling-address
.
Example
# Prohibiting X.25 interface Serial0 from carrying called DTE address when sending
calling request.
[3Com-Serial0]
x25 ignore called-address
5.1.27 x25 ignore calling-address
Syntax
x25 ignore calling-address
undo x25 ignore calling-address
View
Interface view
Parameter
None
63
Summary of Contents for 3C13612
Page 1: ...3Com Router Command Reference Guide V1 00 http www 3com com Part No Published August 2003 ...
Page 199: ...3Com Router Command Reference Guide V1 00 8 1 36 reset stp statistics 167 6 ...
Page 456: ...3Com Router Command Reference Guide V1 00 Quidway reset ipx statistics 96 ...
Page 493: ...Routing Protocol 6 1 10 ip policy route policy 137 5 ...
