3Com 3C13612 Command Reference Manual Download

Page: 74 / 859

3Com Router Command Reference Guide — V1.00

View

System view

Parameter

trap-type

Type of the trap that will be sent,which can be:

bgp

Enable the router to send bgp traps.

dlsw

Enable the router to send dlsw traps.

Enable the router to send frame-relay traps.

ndec

Enable the router to send crypto card module traps.

pos:

Enable the router to send Trap packet of POS module.

rmon:

Enable the router to send rmon Trap packet.

system:

Enable the router to send system Trap packet.

Enable the router to send terminal access server traps.

standard

[

trap-option

]: Enable the router to send SNMP traps. When

configuring the router for sending

standard

trap, you can also configure the

parameter of trap

notification-option

trap-option

Trap notification option. This parameter can be configured when

configuring the

standard

traps. This parameter can have the following options:

authentication:

Enable the router to send authentication traps.

Coldstart:

Enable the router to send cold-start traps.

Warmstart:

Enable the router to send warm-start traps.

Linkup:

Enable the router to send traps when the line protocol on the interface

is up.

linkdown

Enable the router to send traps when the line protocol on the

interface is down.

Description

Using the

snmp-agent trap enable

command, you can enable the router to send

Trap messages or specify the type of the transmitting Trap packet. Using the

undo

snmp-agent trap enable

command, you can disable the router to send traps.

By default, the router is disabled to send traps.

If the type of traps is not specified, by default, executing this command will transmit all

types of traps, i.e. authentication, cold start, warm-start, link status (up or down), will

be sent.

Before configuring

snmp-agent trap enable

command, the user should use

snmp-agent target-host

command to configure the host which can receive Trap

messages.

For related commands, see

snmp-agent target-host

Summary of Contents for 3C13612




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands

3Com 3C13612, Command Reference Manual

Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands