3Com 3C13612 Command Reference Manual Download

Page: 14 / 859

3Com Router Command Reference Guide — V1.00

time

hh:mm

[

dd/mm/yy

]: Specify a time for timed reboot. If no date is specified, it

defaults to the current day.

reason-string

: Describes the reboot reason.

cancel

: Cancel the timed reboot settings that have been set.

Description

Using the

reboot

command, you can reboot the router.

The function of this command is similar to first powering off the router and then

restarting it. When the router is maintained remotely, it is not necessary to reboot the

router at where the router is located; instead, you can reboot it remotely.

Using the

reboot

command with parameters, you can set timed reboot. This is helpful

for online version upgrade and configuration modification/maintenance. If you do not

reboot the router after upgrading a version online, the new version will not be

available. In most cases, however, an administrator cannot reboot the router

immediately after maintenance of the router if such undertakings may affect the

ongoing activities. By setting timed reboot, the administrator can set the router to

automatically reboot at a time that minimizes the impact on the ongoing activities.

When rebooting the router, you need to check if the router configuration files need to

be saved.

Example

# Reboot the router.

[3Com]

reboot

WARNING: System will REBOOT! Continue?[Y/N]

System is now rebooting, please wait.

1.2.11 setup

Syntax

setup

View

system view

Parameter

None

Summary of Contents for 3C13612




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands

3Com 3C13612, Command Reference Manual

Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands