3Com Router Command Reference Guide — V1.00
5.1.32 x25 queue-length
Syntax
x25 queue-length
queue-length
undo x25 queue-length
View
Interface view
Parameter
queue-length
: length of the queue (with the number of packets as the unit). It is valued
in the range of 1 to 1000.
Description
Using the
x25 queue-length
command, you can configure the length of the hold queue
of the X.25 Virtual circuit. Using the
undo x25 queue-length
command, you can
restore the length of the queue to the default value.
By default, the
queue-length
is 500.
When the data traffic is too heavy, you can use this command to extend the receive
queue and send queue of the X.25 VC to avoid data loss which may affect transmission
performance. It should be noted here that modifying this parameter would not affect the
hold queue limits of the existing VC.
For related commands, see
x25 packet-size
.
Example
# Set the X.25 hold queue to hold 75 datagrams.
[3Com-Serial0]
x25 queue-length 75
5.1.33 x25 receive-threshold
Syntax
x25 receive-threshold count
undo x25 receive-threshold
View
Interface view
Parameter
count
: Count of packets that can be received before the acknowledgement, ranging 0
and to input window size. If it is set to 0 or the window size, this function will be disabled.
70
Summary of Contents for 3C13612
Page 1: ...3Com Router Command Reference Guide V1 00 http www 3com com Part No Published August 2003 ...
Page 199: ...3Com Router Command Reference Guide V1 00 8 1 36 reset stp statistics 167 6 ...
Page 456: ...3Com Router Command Reference Guide V1 00 Quidway reset ipx statistics 96 ...
Page 493: ...Routing Protocol 6 1 10 ip policy route policy 137 5 ...