3Com 3C13612 Command Reference Manual Download

Page: 690 / 859

3Com Command Reference Guide — V1.00

Description

Using the

settr

command, you can configure a special time range. Using the

undo

settr

command, you can cancel the set special time range.

By default, no settr is configured, that is, all are set to normal time ranges.

This command is used to configure the time range. Six time ranges can be

configured at most at the same time, and they can be displayed via the

display

timerange

command. If a time range being used is to be modified, this modification

will be take effect in a minute (the system queries the time interval for the time range).

The time range should be set in the 24-hour system. If you want to set a time range

from 9pm to 8am, you can set it to “

settr

21:00 23:59 0:00 8:00”. Because both ends

of the set time range belong to the same time range, no switching will take place

within the time range. In addition, this setting has withstood the Y2K test.

For related commands, see

timerange

display timerange

Example

# Configure the time range as 8:30 - 12:00, 14:00 - 17:00.

[3Com]

settr 8

30 12

00 14

00 17

3.1.13 timerange

Syntax

timerange

{

enable

disable

}

View

System view

Parameter

enable

: Enabling the timerange packet filter function.

disable

: Disabling the timerange packet filter function.

Description

Using the

timerange

command, you can enable or disable the timerange packet filter

function.

By default, timerange disable.

This function is used to enable or disable the timerange filter function. The

configuration result can be displayed via the

display firewall

command, or via the

Summary of Contents for 3C13612




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands

3Com 3C13612, Command Reference Manual

Search results

Summary of Contents for 3C13612

Reviews:

Related manuals for 3C13612

Brands by name

Popular brands