Interface Management
received the keepalive packets from the peer after multiple keepalive intervals, it will
deem that the line is faulty. If the delay for receiving keepalive packets exceeds the
limit set on the interface, the line will be considered to be faulty and will be disabled.
When the serial interface is encapsulated with HDLC protocol, the keepalive interval
set on the end devices of the line should be the same.
For related commands, see
display interfaces
.
Example
# Set the time interval for sending keepalive packets on serial0 to 20 seconds.
[3Com-Serial0]
timer hold 20
3.2 CE1/PRI Interface Configuration Commands
3.2.1 channel-set (CE1/PRI Interface)
Syntax
channel-set set-number timeslot-list range
undo
channel-set
set-number
View
CE1/PRI interface view
Parameter
set-number
: The channel set number formed by binding timeslots on an interface. It is
in the range 0 to 30.
range
: Number of the bound timeslots, it is in the range 1 to 31. When specifying
timeslots to be bound, you can configure a single timeslot using the form of
number
,
or timeslots within a range using the form of
number1-number2
, or specify multiple
timeslots using the form of
number1, number2-number3
simultaneously.
Description
Using the
channel-set
command, you can bind the timeslots of the CE1/PRI
interface as channel sets. Using the
undo channel-set
command, you can cancel
the corresponding timeslot binding.
By default, no channel-set is bound.
33
Summary of Contents for 3C13612
Page 1: ...3Com Router Command Reference Guide V1 00 http www 3com com Part No Published August 2003 ...
Page 199: ...3Com Router Command Reference Guide V1 00 8 1 36 reset stp statistics 167 6 ...
Page 456: ...3Com Router Command Reference Guide V1 00 Quidway reset ipx statistics 96 ...
Page 493: ...Routing Protocol 6 1 10 ip policy route policy 137 5 ...
