3Com Router Command Reference Guide — V1.00
Example
# Set the local tunnel name of L2TP group 1 to itsme.
[3Com-l2tp1]
tunnel name itsme
1.1.18 tunnel password
Syntax
tunnel password
{
simple | cipher
}
password
undo tunnel password
View
L2TP group view
Parameter
simple
: Password shown in plain text;
cipher
: Password shown in cipher text.
password
: Password used during the tunnel authentication, which is a character string
of 1 to 16 characters.
Description
Using the
tunnel password
command, you can configure the password used during
tunnel authentication. Using the
undo tunnel password
command, you can cancel
the password of the tunnel authentication.
By default, the password of tunnel authentication is the router name.
This command can be used on both LAC and LNS, and is an optional configuration.
When creating a L2TP group, the local tunnel name and the tunnel password are both
initialized to be the router’s name.
For related commands, see
tunnel authentication, tunnel name
.
Example
# Set the tunnel password on L2TP group 1 to “yougotit” and make it shown in the
form of cipher text.
[3Com-l2tp1]
tunnel password cipher yougotit
18
Summary of Contents for 3C13612
Page 1: ...3Com Router Command Reference Guide V1 00 http www 3com com Part No Published August 2003 ...
Page 199: ...3Com Router Command Reference Guide V1 00 8 1 36 reset stp statistics 167 6 ...
Page 456: ...3Com Router Command Reference Guide V1 00 Quidway reset ipx statistics 96 ...
Page 493: ...Routing Protocol 6 1 10 ip policy route policy 137 5 ...
