Yamaha FX Nytro FX10MTRAX, Руководство по обслуживанию, Страница: 56 / 859

2-9
INSP
ADJ
VALVE CLEARANCE ADJUSTMENT
6. Adjust:
• Valve clearance
Adjustment steps:
• Remove the valve lifter 1 and the valve pad 2
with a valve lapper
3
.
NOTE:
• Cover the timing chain opening with a rag to pre-
vent the valve pad from falling into the crankcase.
• Make a note of the position of each valve lifter 1
and valve pad
2
so that they can be installed in
the correct place.
• Select the proper valve pad from the following
table.
NOTE:
• The thickness
a
of each valve pad is marked in
hundredths of millimeters on the side that
touches the valve lifter.
• Since valve pads of various sizes are originally
installed, the valve pad number must be rounded
in order to reach the closest equivalent to the
original.
• Round off the original valve pad number
according to the following table.
Valve lapper:
90890-04101
Valve lapping tool:
YM-A8998
Valve pad thickness
range
Available valve pads
Nos.
120 ~ 240
1.20 ~
2.40 mm
(0.047 ~
0.094 in)
25 thicknesses in
0.05 mm (0.0020 in)
increments
Last digit Rounded value
0 or 2 0
5 5
8 10