Yamaha FX Nytro FX10MTRAX, Руководство по обслуживанию, Страница: 492 / 859

5-55
ENG
CRANKCASE
5. Tighten:
• Crankcase bolts (M9
×
105 mm)
1
~
8
NOTE:
Tighten the bolts in the order of the embossed
numbers on the crankcase.
• Tighten the crankcase bolts.
• Loosen and retighten the crankcase bolts.
• Tighten the crankcase bolts further to reach
the specified angle 65 ~ 70°.
WARNING
If the bolt is tightened more than the specified
angle, do not loosen the bolt and then retighten
it. Instead, replace the bolt with a new one and
perform the procedure again.
CAUTION:
• Do not use a torque wrench to tighten the bolt
to the specified angle.
• Tighten the bolt until it is at the specified
angle.
NOTE:
On a hexagonal bolt, note that the angle from one
corner to another is 60°.
T
R
.
.
Crankcase bolt
1
~
8
:
1st:
15 Nm (1.5 m · kg, 11 ft · lb)
T
R
.
.
Crankcase bolt
1
~
8
:
2nd:
15 Nm (1.5 m · kg, 11 ft · lb)
T
R
.
.
Crankcase bolt 1 ~ 8 :
Final:
Specified angle 65 ~ 70°
2
5
6
7 1
4
3
8