Yamaha FX Nytro FX10MTRAX, Руководство по обслуживанию, Страница: 224 / 859

3-15
CHAS
STEERING
8. Install:
• Handlebar
1
• Handlebar holders 2
NOTE:
• The handlebar holders should be installed with
the punch marks
a
facing forward.
• Align the punch mark
b
on the handlebar with
the upper surface of the lower handlebar holder.
(FX10)
• Align the punch mark
b
on the handlebar with
the upper surface of the steering joint. (FX10RT/
FX10RTR/FX10RTRA/FX10MT/FX10MTR/
FX10MTRA)
CAUTION:
First, tighten the bolts on the front side of the
handlebar holder, and then on the rear side.
9. Install:
For FX10/FX10RT/FX10RTR/FX10RTRA
• Wind deflector bracket holder
1
• Wind deflector bracket
2
NOTE:
Align the end of the wind deflector bracket with the
punch mark
a
on the handlebar.
T
R
.
.
Handlebar holder bolt:
23 Nm (2.3 m · kg, 17 ft · lb)
a
b
1
2
2
1
a
10. Install:
• Handlebar protector
1
(FX10/FX10RT/
FX10RTR/FX10RTRA/FX10MTRA)
NOTE:
Install the handlebar cover
1
, making sure not to
pinch the cables, leads, etc.
11. Adjust:
• Throttle cable free play
Refer to “THROTTLE CABLE FREE PLAY
ADJUSTMENT” in CHAPTER 2.
1