Yamaha FX Nytro FX10MTRAX, Руководство по обслуживанию, Страница: 554 / 859

6-10
COOL
WATER PUMP
INSPECTION
1. Inspect:
• Water pump housing cover
• Water pump housing
• Impeller shaft
Cracks/damage/wear
→
Replace.
2. Inspect:
• Bearing
Rough movement
→
Replace.
ASSEMBLY
1. Install:
• Oil seal 1
(to the water pump housing)
NOTE:
• Before installing the oil seal, apply tap water or
coolant onto its outer surface.
• Install the oil seal with a socket that matches its
outside diameter.
2. Install:
• Bearing
NOTE:
Install the bearing with a socket that matches its
outside diameter.
3. Install:
• Water pump seal 1
CAUTION:
Never apply oil or grease onto the water pump
seal surface.
NOTE:
• Install the water pump seal
1
with the mechani-
cal seal installer 4 and middle driven shaft bear-
ing driver
5
.
• Before installing the water pump seal, apply
Yamaha bond No.1215 (Three Bond No.1215
®
)
2 to the water pump housing 3 .
È
Push down
Mechanical seal installer:
90890-04145
Middle driven shaft bearing driver:
90890-04058
Bearing driver 40 mm:
YM-04058
Yamaha bond No. 1215:
90890-85505
(Three Bond No.1215
®
)
New
New