1
FKRS-EU
2.4
Fire batt with ablative coating
3.2
Lightweight partition wall or compartment wall
with metal support structure or steel support
structure, cladding on both sides
6.2
Mineral wool,
≥
1000 °C,
≥
80 kg/m³, only in con-
junction with ablative coating or sleeve, to be
used with damper spacings 10 – 40 mm
6.5
Mineral wool (depending on wall construction)
6.10
Ablative coating around the perimeter,
d = at least 2.5 mm
6.19
Mineral wool > 1000 °C, > 80 kg/m³,
thickness = 20 mm, leave out the actuator and
release mechanism; inspection openings must
remain accessible
6.20
Sleeve (can be ordered separately)
6.24
Elastomeric foam (flame-resistant, non-drip-
ping)
The following applies in Germany: For notes
on the use of elastomeric foams, see
.
7.10
Trim panels
7.13
Cladding, fire-resistant, also with sheet steel
insert
#
Optional for W = 94 – 100 mm according to
installation details
*
6.19, 6.20 or 6.24 as an alternative
**
Installation near the floor analogous to
–
Note:
The fire resistance properties of depend on the nominal width and 6.10*.
Lightweight partition wall
NW
[mm]
Fire resistance prop-
erties
to
Coating
s2
[mm]
Detail
Installation side
A
Operating side
B
100 – 200
EI 90 S
–
–
10 – 600
,
100 – 315
EI 90 S
–
x
10 – 600
,
100 – 200
EI 120 S
–
x
40 – 600
,
100 – 315
EI 120 S
x
x
40 – 600
,
100 – 315
EI 60 S
–
–
10 – 600
,
100 – 315
EI 30 S
–
–
10 – 600
,
Installation
Lightweight partition walls and compartment wall... > Dry mortarless installation with fire batt
Fire damper Type FKRS-EU
87
Содержание FKRS-EU
Страница 176: ...Fire damper Type FKRS EU 176...
