Trox Technik FKRS-EU, Инструкция по установке и эксплуатации

Страница: 172 / 176

Item
no.
Description
7 Supporting construction
7.3 UA section
7.4 U50 channel
7.5 Steel support structure
7.6 Perimeter metal section
7.7 Timber stud, at least 60
×
80 mm
7.9 Half-timbered construction
7.10 Trim panels (optional)
7.11 Trim panels, double layer, staggered joints
7.12 Trim panels, wood sheet
7.13 Cladding made from material x, one, two or
three layers
7.13a Cladding, fire-resistant
7.13b Cladding, wood sheet, at least 600 kg/³
7.14 Reinforcing board made from material x, one,
two or three layers
7.15 Wooden floorboard / floor tile / wood sheet
min. 600 kg/m³
7.16 Wooden beam / gluelam (reduce distances
between wooden beams to the size of the
installation opening)
7.17 Trimmers, wooden beam / gluelam, metal
support structure or steel support structure
(see installation details)
7.18 Formwork
7.19 Fire-resistant cladding
7.20 Fixing kit GL for FK-EU
7.21 Ceiling joint strips
7.22 Ceiling joint section
7.23 Sheet steel insert depending on wall manu-
facturer
7.24 Ceiling design
7.25 Reinforced concrete support
7.26 Hollow stone
7.27 Profile sheet metal
Item
no.
Description
8 Material for extended applications
8.1 PROMATECT®-H strip b ≥ 100 mm,
d = 10 mm
Item
no.
Description
8 Material for extended applications
8.2 PROMATECT®-H strip b ≥ 200 mm,
d = 10 mm
8.3 PROMATECT®-LS board d = 35 mm
8.4 Hilti mounting rail MQ 41
×
3 or equivalent
8.5 Hilti drilled plate MQZ L13 or equivalent
8.6 Hilti fixing band LB26 or equivalent
8.7 Mounting rail, Würth Varifix 36
×
36
×
2,5, or
Müpro MPC 38/40 or equivalent
8.8 Fixing bracket, Varifix or Müpro MPC or
equivalent
8.9 Bracket, Varifix ANSHWNKL-
PRFL36-90GRAD or Müpro mounting
bracket 90°, galvanised, or equivalent
8.10 Large gears
8.11 Actuator
8.12 Actuator mounting plate
8.13 Small gears
8.14 Connecting cable
8.15 Adjustment screws
8.16 Actuator mounting plate
8.17 Cover
8.18 Junction box
8.19 Support, made from 8.3
8.20 Promaseal®-Mastic intumescent sealant
8.21 Fire-resistant sealant CFS-S ACR CW
8.22 Calcium silicate board
8.23 Foam rubber seal
8.24 Retaining plate on both sides, sheet steel
≥
1 mm thick
8.25 Bracket, e.g. Hilti MM-B-30 or equivalent
Item
no.
Description
9 Accessories
9.1 Flexible connector
9.2 Extension piece or duct
9.3 Prop
9.4 Sheet steel duct with L90 cladding and sus-
pension system according to Promat®
manual, construction 478, latest edition
9.5 Suspension
Explanation
Fire damper Type FKRS-EU 172