Trox Technik FKRS-EU, Инструкция по установке и эксплуатации

Страница: 24 / 176

Extension pieces
To ensure that the fire damper can be connected to the
ducting after installation even if the wall or ceiling is
fairly thick, the fire damper should be extended with a
suitable extension piece (attachment or extension by
others) on the installation side, see also extension
pieces Ä 158 .
Installation positions
The fire damper can be installed with the damper blade
shaft in any position (0 to 360°). The position of the
release mechanism is not critical but the mechanism
must remain accessible for maintenance.
Fig. 12: Installation positions and distances
a Distance between two fire dampers. The distance
depends on the installation situation and is given in
the installation details.
If a duct smoke detector is installed in the connected
duct, it must be arranged at the top (deviations on
request, independent of the installation position of the
fire damper).
Fig. 13: Any installation position (0 – 360°), duct smoke
detector always at top
1 Keep clear to provide access for operation
Installation
General installation information
Fire damper Type FKRS-EU 24