Trox Technik FKRS-EU, Инструкция по установке и эксплуатации

Страница: 59 / 176

5.4.11 Dry mortarless installation with fire batt
Fig. 46: Dry mortarless installation with fire batt into a solid wall
1 FKRS-EU
2.4 Fire batt with ablative coating
3.1 Solid wall
4.1 Solid ceiling slab
6.10 Ablative coating around the perimeter,
d = at least 2.5 mm
6.19 Mineral wool > 1000 °C, > 80 kg/m³,
thickness = 20 mm, panel material around the
perimeter, leave out the actuator and release
mechanism; inspection openings must remain
accessible
6.20 Sleeve (can be ordered separately)
6.24 Elastomeric foam (flame-resistant, non-drip-
ping)
The following applies in Germany: For notes
on the use of elastomeric foams, see
Ä
7 .
* 6.19, 6.20 or 6.24 as an alternative
** Installation near the floor analogous to
– See table Ä 59
Note: The fire resistance properties of depend on the nominal width and 6.10*.
Solid wall
NW
[mm]
Fire resistance properties
to
Coating Detail
Installation side
A
Operating side
B
100 – 200 EI 90 S – – ,
100 – 315 EI 90 S – x
,
100 – 200 EI 120 S – x ,
100 – 315 EI 120 S x x ,
Installation
Solid walls > Dry mortarless installation with fire batt
Fire damper Type FKRS-EU 59