Toshiba Strata AirLink DK40i, Руководство по установке и обслуживанию

Страница: 612 / 724

ACD Installation
CCV Configuration Instructions
13-20
Strata DK I&M 6/00
4. To connect up to two more PCs, use a six-conductor modular telephone cord between the
CCVY “MNTR1” or “MNTR2” port(s) with a PPTC-9 or PPTC-25F to attach the PCs.
Figure 13-19 Connecting Strata DK to SMIS and CCV PCs
Connecting Up to Three CCV PCs
If you are connecting multiple PCs with the CCV application, use:
One Call Center Viewer “Y” Connector (CCVY)
One six-conductor telephone cord per PC, plus one cord for the DK to CCVY connection
One PPTC-9 or PPTC-25F pin connector per PC
➤
To connect up to three CCV PCs to the Strata DK
1. Install the CCVY connector into the Strata DK MIS port (RSIU, RSIS, RMDS, or PIOU
PCBs). See Figure 13-20 .
2. Use a six-conductor twisted pair telephone cord to connect the DK MIS port to the “DK MIS”
jack on the CCVY.
3. Plug a six-conductor modular cord into the “MASTER” port of the CCVY. Use a PPTC-9 or
PPTC-25F at the other end of the cord to connect to the Main Call Center Viewer PC.
Strata DK
CALL CENTER
VIEWER
"Y" CONNECT
OR
MASTER
DK MIS
MNTR1
MNTR2
Second PC
with CCV
PC with SMIS
2425
PPTC-9 or PPTC-25F connector
6-conductor, twisted pair phone cord