Toshiba Strata AirLink DK40i, Руководство по установке и обслуживанию

Страница: 250 / 724

DK424i Configuration
Worksheet 6: DK424i Cabinet Slot Configuration
6-30
Strata DK I&M 6/00
RPTU must be placed in designated slots as shown in Table 6-20 . The RPTU PCB can provide up
to 16 or 23 ISDN PRI lines. The RPTU slot provides 16 PRI lines, an additional seven lines
requires that the cabinet slot adjacent to RPTU be vacant.
6. Cordless Telephone Station PCBs
♦ See Worksheet 2: Strata AirLink Wireless Telephone to determine RWIU PCB requirements.
♦ The RWIU must be placed in designated slots as shown in Table 6-21 . The RWIU PCB can
provide up to 16 or 32 Strata AirLink Handsets, depending on where it is placed. The RWIU
slot provides eight handsets. Each additional set of eight handsets requires that an additional
cabinet slot adjacent to RWIU be vacant.
♦ RSTU or RDSU: Each RSTU or RDSU PCB connected to BSIA requires one slot. These
PCBs cannot occupy a slot that is left vacant to provide capacity for RDTU, RPTU, or RWIU,
as shown in
Tables 6-19 ~ 6-21 . Each RSTU PCB provides circuits for up to eight Strata
AirLink Handsets; each RDSU/RSTS provides circuits for four Strata AirLink Handsets.
Table 6-20 RPTU PCB Cabinet Slot Configuration
PRI Lines
Needed
Slots
Needed
RPTU PCBs
Needed
1
1. RPTU PCBs do not have to be installed in the order shown in this table. Example: If only one
RPTU is needed, it can be installed in any RPTU slot shown in the table so long as the slot is
supported by the installed processor.
RPTU cabinet slot placement
1
Base Cabinet
1~16 1
1
S103-RPTU
17~23 2 S104-vacant
2
2. The slot occupied by RPTU supports 1-16 channels; the slot adjacent to RPTU must be vacant
if channels 17 through 23 are needed.
24~39 3
2
S105-RPTU
40~46 4 S106-vacant
2
47~62 5
3
S107-RPTU
63~69 6 S108-vacant
2
Second through fifth cabinets
1 1~16 1 S_01-RPTU
17~23 2 S_02-vacant
2
24~39 3
2
S_03-RPTU
40~46 4 S_04-vacant
2
47~62 5
3
S_05-RPTU
63~69 6 S_06-vacant
2