Toshiba Strata AirLink DK40i, Руководство по установке и обслуживанию

Страница: 521 / 724

Peripheral Installation
Relay Control Options and Door Lock Control
Strata DK I&M 6/00
12-13
Pe
ri
p
h
er
a
l In
st
al
la
ti
on
Lock Control Function
Note
Only one door lock control is available using an optional PCB (PIOU, PIOUS, or PEPU)
and only the optional PCB with the lowest Program 03 Code (41, 42, or 43) will provide
the door lock function.
1. Set Program 77-1 LED 07 to On to configure the PIOU, PIOUS, or PEPU PCB for the door
lock control function (see Figure 12-9 ).
2. Set Program 77-1 LED 20 to Off for a three-second door lock activation time, or set LED 20 to
On for a six-second door lock activation time.
3. If using a PIOU or PEPU, set the P10 jumper plug on the PIOU or PEPU to the MAKE or
BREAK position, as required:
♦ MAKE – Shorts the normally open contacts (pins 7 and 32) when a station’s door lock
button is pressed.
♦ BREAK – Opens the normally closed contacts (pins 7 and 32) when a station’s door lock
button is pressed.
...or
If using a PIOUS, solder the W1 jumper plug on the PIOUS to the MAKE or BREAK
position, as required:
♦ MAKE – Shorts the normally open contacts (DET and DER) when a station’s door lock
button is pressed.
♦ BREAK – Opens the normally closed contacts (DET and DER) when a station’s
'RRU
/RFN
button is pressed.
4. See Figure 12-9 for wiring/interconnecting details. Connect the PIOU, PIOUS, or PEPU to the
MDF as required for the door lock control function.
Figure 12-9 Door Lock Control Option (PIOU/PIOUS/PEPU)
P10
B
M
PIN 34, R-BR
PIN 9, BR-R
17
18
MDF
PIOU/PEPU
W1
K1
Make
DET
DER
MDF PIOUS
To Door Lock
To Door Lock
Break
DE
Terminal on Front Edge of PCB
K1/P10 (24VDC, 1.0 amp Max.)
25-Pair
Amphenol
DET
DER
See Program 77-1,
LED 07, 20
for Relay Options
Door Lock 0 Button
1509
Note
assigned to digital and
electronic telephones in
Program 39 with Code 71.