Thermo Scientific Apreo Скачать руководство пользователя страница 2

Страница: 2 / 182

Trademark Acknowledgments

Microsoft® and Windows are registered trademarks of Microsoft Corporation.

This manual was produced using FrameMaker™ document publishing software.

FrameMaker™ and Adobe are registered trademarks of Adobe Systems Incorporated.

Other product and company names mentioned herein may be trademarks of their respective owners.

The information and materials contained herein are confidential and proprietary to Thermo Fisher Scientific Company.

They are provided for your organization's internal use on a need-to-know basis.

They cannot be duplicated or disseminated for any third party without the express consent of

Thermo Fisher Scientific Company.

Limited Rights

Contractor Name:

Thermo Fisher Scientific

Contractor Address:

5350 NE Dawson Creek Drive, Hillsboro, Oregon 97124, USA

The Government's rights to use, modify, reproduce, release, perform, show, or disclose these technical data

are restricted to those rights specified in:

DFARS 252.227-7015(b)(2), FAR 52.227-14(g)(2) (Alternate II) and FAR 12.211.

Any reproduction of technical data or portions thereof marked with this legend

must also reproduce the markings.

Any person, other than the Government, who has been provided access to such data,

must promptly notify the above named Contractor.

Manufacturer & Technical support

To provide feedback on this document, please submit via

http://www.Thermofisher.com/EM-Sales

Содержание Apreo























































































































































































Результаты поиска

Содержание Apreo

Отзывы:

Похожие инструкции для Apreo

Бренды по названию

Популярные бренды

Thermo Scientific Apreo, Руководство пользователя

Результаты поиска

Содержание Apreo

Отзывы:

Похожие инструкции для Apreo

Бренды по названию

Популярные бренды