Terex Genie GS-2669 BE Скачать руководство пользователя страница 88

Страница: 88 / 205

Service Manual

May 2015

Ground Controls

GS-2669 BE • GS-3369 BE • GS-4069 BE

Part No. 1257106

5-2

Machine Setup

How to Setup the Machine from

Ground Controls

The ground controls can be used to setup the

machine parameters from the ground. Features

that can be adjusted from the ground controls

include machine Model, Options and Speed setup.

This menu can only be entered from ground

controls with the key switch in the ground controls

position.

Tip-over hazard. Do not adjust

function speeds higher than

specified in this procedure.

Setting the function speeds

greater than specifications could

cause the machine to tip over

resulting in death or serious

injury.

Tip-over hazard. This procedure

must only be performed by a

trained service professional.

Attempting this procedure

without the necessary skills

could result in death or serious

injury.

Note: Select a test area that is firm, level and free

of obstructions.

1 Turn the key switch to the ground controls

position and pull out the red Emergency Stop

button to the on position at the platform

controls.

2 Press and hold the ground control scroll up

and scroll down buttons.

Ground Control Menu Buttons

1  scroll down button
2  enter button
3  scroll up button
4  escape button
5  LCD display

3 Pull out the red Emergency Stop button to the

on position at the ground controls.

Result: The ground controls LCD display will

show the following:

4 Use the ground control menu buttons to select

machine Model, Options and Speed Setup

parameters. Follow the menu structure

indicated on the ground control LCD display.

Содержание Genie GS-2669 BE














































































































































































































Результаты поиска

Содержание Genie GS-2669 BE

Отзывы:

Похожие инструкции для Genie GS-2669 BE

Бренды по названию

Популярные бренды

Terex Genie GS-2669 BE, Руководство по обслуживанию

Результаты поиска

Содержание Genie GS-2669 BE

Отзывы:

Похожие инструкции для Genie GS-2669 BE

Бренды по названию

Популярные бренды