20 - MAINTENANCE
EN
Pag.
4/44
- Cap.
20
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
Fig. 20.1A
Rules for a correct machine cleaning
DANGER-WARNING:
ensure that the fixing devices of the safety protections are kept clean and perfectly efficient in
order to guarantee their correct assembly.Ensure that the fixing holes are clean, especially the
blind threaded holes on the horizontal surfaces, that are more prone to fill with shavings and dust.
SAW - MOULDER
By using a power dust aspirator (fig. 20.1A) clean:
-
the tables and all cavities where you see chips and dust.
-
Suction hoods (T fig. 20.1B) by checking that the are no occlusions.
-
With the sliding table in position 1 (totally at entry) fig. 20.1B, then in position 2 (totally at exit), its bottom
guides and specially the points indicated by arrows (H fig. 20.1B) for a 15 mm depth.
-
Guides (A fig. 20.1B) of squaring frame.
-
Rod (L fig. 20.1B) of the fence.
-
Slideways (S fig. 20.1B) of the sliding table and (B fig. 20.1B) of the rail.
-
Groove (C fig. 20.1B) with a brush or cloth drunken with not dangerous solvent.
-
Spindle sliding cylinder (F fig. 20.1B).
-
Presser unit sliding rods (G fig. 20.1B).
-
Moulder spindle lifting screw (V fig. 20.1B).
Then by using a cloth or a brush drunken with a proper and not dangerous product,
clean all moving parts specially the ones exposed to the resin and dust.
DANGER-WARNING:
do not oil, do not grease:
- the guides of sliding table (S fig. 20.1B) and of rail (B fig. 20.1B) .
