4 - INSTALLATION
EN
Pag.
36/53
- Cap.
4
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
4.3.73
FITTING
GUARDS
(cu_4-3-73_0.0)
DANGER-WARNING:
the guard must always be mounted and must be positioned in such a way as to completely cover
the tool.
DANGER-WARNING:
ensure that the fixing devices of the safety protections are kept clean and perfectly efficient in
order to guarantee their correct assembly.Ensure that the fixing holes are clean, especially the
blind threaded holes on the horizontal surfaces, that are more prone to fill with shavings and dust.
4.3.73.1 SPINDLE MOULDER HOOD GUIDE
(cu_4-3-73-1_0.0)
DANGER-WARNING:
to carry out profiling operations, (POSITION 1 -
) fit the hood-fence unit by screwing down
knobs (B fig. 4.3-73-1) in holes (P).
To carry out working at the front end, (POSITION 2 -
) fit the hood-fence unit by screwing down
knobs (B fig. 4.3-73-1) in holes (T).
DANGER-WARNING:
it is forbidden to carry out dead cuts when the hood-fence unit is fitted for working at the front end
(POSITION 2 -
).
Before starting the working adjust guards (Q - R - S fig. 4.3-73-1) to protect the operator as much as
possible against eventual ejections of splints or tool parts.
DANGER-WARNING:
it is forbidden to work without guards (Q, R, S fig. 4.3-73-1).
