1 - GENERAL INFORMATION
EN
Pag.
24/24
- Cap.
1
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
1.15
EMERGENCY
CONDITIONS
(ev_1-15_0.0)
DANGER-WARNING:
in case of flooding of the room where the machine is housed, immediately disconnect the electrical
power supply. Before starting work, have the machine checked by a specialised technician.
DANGER-WARNING:
in case of fire, immediately disconnect the electrical power supply and intervene using suitable fire
extinguishers directing the jets at the base of the flames. Even if the machine has suffered no
apparent damage, before restarting work have the machine checked by a specialised technician.
DANGER-WARNING:
if there is a mechanical block follow the following instructions to release the machine safely:
- isolate the machine electrically and pneumatically (to isolate the machine electrically rotate the
main electrical switch to the 0 position and padlock it; disable the uninterruptible power supply, if
one has been installed on the machine; to isolate the machine pneumatically rotate the lever at
the pneumatic system inlet to the closed position and padlock it);
- contact the manufacturer's SERVICE centre (Par. 1.3).
A free space without obstructions must be provided around the machine (see par. 3.7), to allow fast escape in case
of danger.
This machine must not be operated in explosive environments.
1.16
MACHINE REMOVAL - STORING - DEMOLITION
(ev_1-16_0.0)
To remove the machine, disconnect it from the electric and pneumatic system. Follow the instructions in chap. 4.
In case of extended inactivity of the machine, disconnect it from the electrical and pneumatic system. Thoroughly
clean it as already described for ordinary cleaning and cover the work and sliding tables and the tool holder
spindles with antirust protection. Do not store the machine in humid environments and protect it from atmospheric
agents.
The machine is constructed in non-toxic unharmful materials. In case of demolition, separate the ferrous material
from the plastic materials and send them to the respective scrap yards.
1.16.1
OUT OF ORDER MACHINE
(1.16.1)
The machine is manufactured with non-toxic or harmful materials; in case of scrapping separate the ferrous
materials from the plastic materials and scrap respectively. We recommend contacting a specialised and
authorised company, in compliance with the applicable laws and standards.
The operators moving the machine and the maintenance personnel must wear the IPE required for the risks
involved with the type of use and in compliance with the applicable laws and standards.
To move and transport the machine refer to the instructions in chap. 4.
