20 - MAINTENANCE
EN
Pag.
26/44
- Cap.
20
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
20.18.3
MOULDER
(cu_20-18-3_0.0)
DANGER-WARNING:
all adjusting operations are to be carried out with standstill spindle.
DANGER-WARNING:
(U.S.A. and CANADA version): main switch (2 fig. 20.18.3) is turned to I (ON).
DANGER-WARNING:
use proper gloves for handling the tools.
•
(U.S.A. and CANADA version): move the selector (E fig. 20.18.3) to the position ( ).
Release the router motor brake by turning the selector (W fig. 20.18.3) to position "I".
•
Lift the lever (M fig. 20.18.3)
(U.S.A. and CANADA version: activates a microswitch which prevents the motor from starting).
•
Open the door (V fig. 20.18.3).
•
Loosen the handle (A fig. 20.18.3).
•
Push the motor. The belt (C fig. 20.18.3) is now loosened.
•
Change the seat of the belt, positioning it depending on the speed to be obtained, referring to the plate (B
fig. 20.18.3).
•
Operate the motor, moving the two pulleys away and tightening the handle (A fig. 20.18.3).
CAUTION:
an excessive belt tightening will cause both functioning failures and belts wear beforehand.
•
Close the door (V fig. 20.18.3).
•
Lower the lever (M fig. 20.18.3).
DANGER-WARNING:
(U.S.A. and CANADA version): with selector (E fig. 20.18.3) turned to ( ) the machine is under
safe condition.
Before starting the machine make sure that the rotation speed you have selected is proper for the
working, the wood type and for the tool used on the machine.
