6 - SAW UNIT USE AND ADJUSTMENT
EN
Pag.
2/11
- Cap.
6
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
6.1
RIVING KNIFE ADJUSTING
(ev_6-1_0.0)
DANGER-WARNING:
do not work with bare hands; wear safety gloves.
NOTE-INFORMATION:
the machine is always equipped with 1 riving knive.
DANGER-WARNING:
always fit the proper riving knife (supplied).
DANGER-WARNING:
before carrying out any of the operations make sure to cut the main electric power and disconnect
socket T from plug S.
U.S.A. and CANADA version:before carrying out maintenance operations, adjustments or to
dismount any machine member turn main switch (Y fig. 6.1) to 0, lock it then indicate this with a
sign.
DANGER-WARNING:
WAIT UNTIL THE SAW BLADES ARE STILL.
1)
lift the saw unit totally up (inclination: 90°).
2)
Position the squaring frame (A fig. 6.1) as shown in the figure and translate the wagon (H fig. 6.1) completely
to the right.
3)
Lower the lever (M fig. 6.1) and open the guard (N fig. 6.1).
4)
Adjust dividing knife (F fig. 6.1) height by unloosing nut (G fig. 6.1).
DANGER-WARNING:
adjust the position of the riving knife so that its distance from the saw blade is between 3 and 8
mm.
The dividing knife is in the right position when the saw guard covers a part of the cutting edge of
the saw blade.
