10 - USE AND ADJUSTMENT OF PLANER SPINDLE GUARD AND SAFE WORKING
EN
Pag.
8/20
- Cap.
10
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
10.3.1.2
STRAIGHTENING
(fs_10-3-1-2_0.0)
and bridge-type protection
Adjusting the guard for straightening:
the bridge guard must be lowered on the tables and adjusted horizontally relative to the workpiece.
-
Rest the bridge onto the table by means of the knob (B fig. 10.3-1-2) and expose the shaft as it is enough to
let the piece to be machined pass by pulling the bridge away (A fig. 10.3-1-2), after releasing the knob (C fig.
10.3-1-2) (lock the bridge again, then).
-
Press the piece against the fence towards the outlet table by keeping the left hand for example with the
clenched fist and the thumb on the piece.
With the right hand move the piece forwards in order to get a regular motion (for example cleched fist and
thumb on the piece) (2 fig. 10.3-1-2).
