EN
4 - INSTALLATION
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
Cap.
4
Pag.
33/53
4.3.48
PLANING FENCE - ASSEMBLY
(cu-4-3-48-0.0)
With
version, see Par. 4.3.32
With
version, operate as indicated below.
-
Position the planing fence (A fig. 4.3-48) in the required position, and tighten the knob (D fig. 4.3-48).
-
To angle the fence from 90° to 45° loosen the locking device (C fig. 4.3-48) and adjust the fence, observing
the value on the index (E fig. 4.3-48).
-
As soon as the adjustment has been carried out, bring the fence lock (P fig. 4.3-48) to the stop on the
surface unit fence (A fig. 4.3-48) and tighten knob (B fig. 4.3-48).
DANGER-WARNING:
during the machining, the protections (H fig. 4.3-48) and (L fig. 4.3-48) must always be positioned
on the cutterblock.
CAUTION:
lifting and handling the guide should only be carried out by personnel specially trained to execute
this kind of operations, to prevent accidents or to prevent guide from being damaged.
Fig. 4.3-48
