5 - CONTROLS
EN
Pag.
10/14
- Cap.
5
THIS MANUAL IS PROPERTY OF SCM INDUSTRIA S.P.A - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
Machine Start procedure
-
(U.S.A. and CANADA) Main switch (1 fig. 5.5) is turned to I (ON).
-
Move the selector switch (C fig. 5.5) in the chosen working position.
-
Set the selector of the magnetothermal switch (B fig. 5.5) to position "I".
-
Move in the relevant working site:
With reverse rotation for moulder
-
Move the selector switch (C fig. 5.5) in the chosen working position.
-
Set the selector of the magnetothermal switch (B fig. 5.5) to position "I".
-
Press the (M fig. 5.5) button.
-
Move in the relevant working site:
= Surfacing planer..........................................
= Thicknessing planer
= Drilling
..................................................
= Parallel cutting
= Moulder machining .....................................
= Slide machining
Machine Stop procedure
-
Set the selector of the magnetothermal switch (B fig. 5.5) to position "0".
-
Move the selector switch (C fig. 5.5) to position "0".
With reverse rotation for moulder
-
Press the (M fig. 5.5) button.
-
Set the selector of the magnetothermal switch (B fig. 5.5) to position "0".
-
Move the selector switch (C fig. 5.5) to position "0".
