Ross Synergy 2 SD, Руководство по установке

Страница: 136 / 414

6–4 • BNC Configuration and Check Synergy Series Installation Guide (v18)
BNC Configuration
The following procedures will be discussed in this section:
• Naming BNC Inputs
• Restoring Default BNC Names
• Setting Up Mnemonics Displays for BNC Names
• Setting Up BNC Types
• Setting Up Tallies
• Setting Up Alphas
• Setting Up Auto Keys
• Setting Up Panel Buttons
• Setting Up N/S Disable
• Exiting the Setup Menus
For information on setting up Still Store BNCs, refer to the section “ Setting up Still Store BNCs ” on
page 11–8. Refer to the section “ Setting up Character Generator BNCs ” for instructions on setting
up BNCs for a character generator.
You can also set up Router BNCs and Router Levels. Refer to the section “ Setting up Router BNCs ”
for more information. For information on setting up BNCs for an external device, refer to the
appropriate chapter in this guide.
Naming BNC Inputs
In Chapter 4, you connected your physical switcher inputs, including reference, primary inputs and
alpha inputs. In this section, you will
name each physical BNC input using the BNC Names Menu .
This allows you to use actual input names throughout the menus. Additionally, the names that you
choose will appear on the Preview Overlay output (provided that the Preview Overlay Option is
installed).
The BNC Names Menu includes the following areas:
• The Main Area of the BNC Names Menu provides an array of letters and numbers. The
reverse video highlight indicates the “selected” character — the position of which is
controlled by the two upper scroll knobs. The Current Name , Mnemonic , and New
Name fields are located below the array. In the New Name field, the reverse video
highlight indicates the “active” character — the one that you are changing.
• The Label Area provides an array of tools for naming and editing your physical names.
• The Scroll Area provides three functions that are controlled by their respective knobs:
~ The top
Horizontal
knob moves the highlight horizontally.
~ The middle
Vertical
knob moves the highlight vertically.
Note If the mnemonic option is purchased and installed, the Mnemonic
field displays the BNC name as it will appear in the associated
mnemonic display. Further mnemonic display configurations are
discussed in the section “
Setting Up Mnemonics Displays for BNC
Names ” on page 6–7.