Ross Synergy 2 SD, Руководство по установке

Страница: 206 / 414

8–30 • Custom Control Basics Synergy Series Installation Guide (v18)
Custom Controls Menu
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the Button knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) in the list have
already been programmed.
3. Navigate to the Special Menu as follows:
• Press
Start Recording B Insert Special B Special
.
Insert Special — Special Menu
4. Assign a safe title to be recalled as follows:
• Use the top knob to select
Safe Title
.
• Use the Safe ID knob to select the stored Safe Title set up that you want to recall
when you run the custom control.
5. Press
Insert
to enter the safe title into your custom control macro.
6. Press
UP ONE
to return to the Custom Controls Recording Menu .
7. Press
Finish Recording
, or the flashing custom control button, to finish recording to
the selected custom control. The custom control button will stop flashing.
This concludes the procedure to recall a safe title setting with a custom control button.
Once your custom control buttons have been programmed, be sure to properly name them. Refer to
the section “
Naming Custom Controls ” on page 8–42 for more information on naming custom
control buttons.
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.