Ross Synergy 2 SD, Руководство по установке

Страница: 176 / 414

7–20 • Basic Communications Setup Synergy Series Installation Guide (v18)
• Use the
Device
knob to select the type of DSK that is connected to the peripheral
port. You can chose between the following:
~
NONE
— Select this option to not assign a DSK to the selected port.
~
CDK111
— Select this option to assign a CDK-111A-M to the selected port.
7. Press
Com Settings
to display the Com Settings Menu .
Communications — Com Settings Menu
8. Set the communications protocols for the DSK as follows:
• Use the
Com Port
knob to select the DSK you are setting the communications
settings for.
• Use the Baud knob to select 19200 as the baud rate for the CDK-111.
• Use the
Parity
knob to select
ODD
.
9. Press
Com Type
to display the Com Type Menu .
Communications — Com Type Menu
10. Select the type of serial communication that will be used to communicate with the DSK
as follows:
• Use the Com Port knob to select the DSK you want to set the communications
type for.
• The middle
Type
knob is fixed at
RS-422
.
This completes the set up of the peripheral ports for the CDK-111A-M Downstream Keyer.
Note If the CDK-111A-M card is not being used and is removed from the
frame, you must set the middle
Device knob to NONE .