Ross Synergy 2 SD, Руководство по установке

Страница: 202 / 414

8–26 • Custom Control Basics Synergy Series Installation Guide (v18)
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the custom control button you want to record to as follows:
• Use the Bank knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) in the list have
already been programmed.
3. Navigate to the Special Menu as follows:
• Press
Start Recording B Insert Special B Special
.
Insert Special — Special Menu
4. Assign a menu to display to the selected custom control macro as follows:
• Use the top knob to select Go To Menu .
• Use the middle knob to select
3D
.
• Use the bottom knob to select the menu you want to display when the custom
control is run. You can select between the follow:
~
Position/Crop
— Select this option to display the S&T Position/Crop Menu
1-2 for the active Fly Key when the custom control is run.
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.
Note When you run a Go To Menu custom control, the menu that is
displayed will be determined by the current active MLE and Keyer . If
Key 2 is active on MLE 2 , the menu will be displayed for Key 2 on
MLE 2 .