Ross Synergy 2 SD, Руководство по установке

Страница: 153 / 414

Synergy Series Installation Guide (v18) BNC Configuration and Check • 6–21
Checking Keys
Once your inputs have been checked, you can now check each auto-key association that you have
made. This procedure allows you to verify that each alpha-fill combination is working properly, and
generating a proper linear key.
Use the following procedure to check your keys:
1. On the PGM Bus , select the re-entry crosspoint for MLE 1 . Note that sample crosspoint
names are used below.
Sample PGM/PST Bus
2. On MLE 1 , select a background source on the PGM Bus (such as a camera or VTR),
and select your first key source on the KEY Bus . A sample selection is shown below.
Sample MLE Selections
3. In the MLE’s Key 1 Group :
• Press AUTO SELECT to select a linear key type. The KEY MEM button will
automatically light.
• Press CUT to take the key to air. The CUT button lights momentarily, and the red
ON LED lights to indicate that the selected key is on air.
Note
In the sample illustration above, the Key Bus sources do not match the
BKGD and PST bus sources. This is because this particular user has
elected to use the PGM/Key SHIFT function, thus making the Key
Bus shifted all the time . Refer to the section “ Setting Up Panel
Buttons ” on page 6–15 for instructions.
SHIFT BLACK
PGM
PST
CAM
1
CAM
2
CAM
3
CAM
4
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
SHIFT
MLE
1
MLE
1
BLACK
CAM
1
CAM
2
CAM
3
CAM
4
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
ON
ON
MLE Re-entry
Crosspoint
BLACK
BKGD
KEY
PST
CAM
1
CAM
2
CAM
3
CAM
4
BLACK
CG
1
CG
2
DVE
1
DVE
2
BLACK
CAM
1
CAM
2
CAM
3
CAM
4