Ross Synergy 2 SD, Руководство по установке

Страница: 126 / 414

5–4 • Using the Menu System Synergy Series Installation Guide (v18)
3. Label Area
Labels on the two bottom rows represent functions that you can activate, or buttons that
route you to further sub-menus. These labels change depending upon the selected mode
and menu. A menu function is activated by pressing its corresponding
Soft Key .
• A label that is underlined indicates that a sub-menu is available for that function.
Pressing the button takes you one level down.
• Non-underlined labels are simply functions that you can activate by pressing the
associated soft key, or other screens that you can access within the same menu.
4. Soft Keys
The six Soft Key buttons below the display correspond to labels that appear in the Label
Area of the display. Pressing a Soft Key activates the selected function, or switches to
the selected menu.
5. Scroll Area
The right-hand section of the display (adjacent to the three Scroll Knobs ) is reserved for
functions that you can adjust with the scroll knobs. Up to three different adjustable
parameters can appear in this section, each of which will be labeled accordingly.
When the three “ Positioner Icons ” appear in this area, you can adjust the selected
function or parameter either with the Scroll Knobs or with the Positioner . Refer to the
section “ Positioner Icons ” on page 5–5 for details.
6. Scroll Knobs
The three scroll knobs are assignable. Depending upon the selected mode (and menu),
the functions of the knobs
change just like the display labels. When a function requires a
knob to adjust a parameter, up to three labels (and their associated functions) will appear
in the right-hand section of the display — arranged vertically. Turn the appropriate knob
to adjust the associated parameter.
Note In this guide, display functions are referred to by their actual label
names , and not by the soft key that is pressed (below the display). For
example, the phrase “... press Disk ...” is used, rather than “... press
Soft key #2 ... ”
Note In this guide, knobs are referred to by their name or location . For
example, the phrase “Use the top knob to...” would be used to describe
the top-most knob.
Operating
Tip
When using the three scroll knobs, you should adjust the top knob first,
followed by the middle and then the bottom. When you change the top
knob, the bottom knobs change in sync, showing the parameters for
each selection chosen by the top knob.
When you change one of the
bottom two knobs, only that parameter changes.