Ross Synergy 2 SD, Руководство по установке

Страница: 159 / 414

Synergy Series Installation Guide (v18) Basic Communications Setup • 7–3
Remote Port Expander (BSS4) Setup
The RS-422 Four Port Buffered Smart Switch (Model RS422BSS4) connects to one of the Remote
Ports on the back of the Synergy control panel to allow you to control up to four serial devices from
that one port. This can increase the total number of remote ports on the Synergy control panel from 8
to 32, depending on the number of BSS4 switches you have.
Refer to Appendix C, “ Hardware Options ” for information on cabling and connecting the BSS4 to
the Synergy switcher.
Remote Port Expander Communications Setup (BSS4)
Use the following procedure to configure the BSS4 Remote Port Expander:
1. Navigate to the Communications Menu 1-2 as follows:
• Press
HOME B MORE B Setup B Installation B Communications
.
2. Press
Type
to display the Type Menu .
Communications — Type Menu
3. Assign a com port to the BSS4 as follows:
• Use the
Com Port
knob to select the remote port on the Synergy switcher that is
connected to the BSS4.
• Use the Device knob to select Expander .
4. Press
Select Device
to display the Select Device Menu .
Communications — Select Device Menu
Important
The maximum number of BSS4 remote ports you can use at any one
time may vary depending on the type of equipment you are connecting.