Ross Synergy 2 SD, Руководство по установке

Страница: 128 / 414

5–6 • Using the Menu System Synergy Series Installation Guide (v18)
A) When the left-right Positioner Icon appears, you can use the top knob to adjust the
selected function or you can move the Positioner left and right .
B) When the up-down Positioner Icon appears, you can use the middle knob to adjust
the selected function or you can move the Positioner up and down .
C) When the circular Positioner Icon appears, you can use the bottom knob to adjust
the function, or you can twist the Positioner ’s knob clockwise and
counter-clockwise .
When you turn the
MENU
button off, the Positioner once again is assigned to the current panel
function and location.
Refer to Chapter 7 of the Synergy Series Operation Guide for additional information on the
Positioner itself, and the three Positioner Icons .
Adjusting the Display
Use the following procedure to adjust the brightness or contrast of the large display or the mnemonic
displays:
1. Navigate to the Display Menu as follows:
• Press HOME B MORE B Setup B Display .
Display Menu — Large Display
2. Press Large Display to adjust the brightness and contrast of the Menu display.
• Use the Contrast knob to adjust the contrast.
3. Press Mnemonics Displays to adjust the brightness and contrast of the mnemonic
displays.
• Use the Brightness knob to adjust display brightness.
• Use the Contrast knob to adjust display contrast.
This completes the procedure for adjusting the brightness or contrast of the large display or the
mnemonic displays.
Note
You must have the Mnemonics option installed in order to be able to
adjust the Mnemonics display levels.